Hi
we have a problem with the HP 10Gbps Ethernet passthru in Bay4 of C7000 enclosure. It shows powered “ON” for the interconnect but no NIC link status shows up. We have 2 Servers connected to port 3 and port 11 of Bay 4 but none of their NIC links are up. We tried reseating the pass thru module but no luck. Also tried these same FC cables to another bay/ports and it works fine which confirms something wrong with the passthru module itself. Unfortunately any part of logs show the error. Below is an exerpt from "show all" output.
Bay Interconnect Type Manufacturer Power Health UID Management IP
--- ----------------- -------------------- ------- --------- --- ---------------
1 Ethernet HP On OK Off 0.0.0.0
2 Ethernet HP On OK Off 0.0.0.0
3 Ethernet HP On OK Off 0.0.0.0
4 Ethernet HP On OK Off 0.0.0.0
5 Fibre Channel HP On OK Off 0.0.0.0
6 Fibre Channel HP On OK Off 0.0.0.0
Appreciate any help, Many thanks!!